Finishing up the glass on the transom

Ok, so I am out of supplies, and out of energy. I got what I wanted to get done... DONE!!! The transom layup and stringer layup is finished. All I need to do now is test fit the drive. I need to come up with a rig that will help me drill the holes perfectly perpendicular to the hull. 


Anyway here are the pictures.


I decided to put in some drains at the back of the stringers just in case water gets back there. If you notice the glass is snug up against the stringer. NICE!



I then put in some little pieces of PVC after i put a ton of resin in the hole.




I also put down a layer of 24oz Woven as a final skin on the transom. Do i need more?



Is this enough?



I cut new floor pieces and glued them in.



I then put down two layers of CSM to cover everything up.